Output Shaft and Output Carrier Assembly Installation
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the output shaft (2) into the output carrier assembly (1).
- While holding the output shaft (2), place the output carrier assembly (1) into the top of the output ring gear (3).
- Move/rotate the output shaft until the carrier assembly drops into the output ring gear (3).
- Gently place the output shaft onto the main shaft (4).
- Rotate the carrier assembly until the carrier assembly seats.