LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1354 (Automatic Transmission - 4L60-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Converter Housing Removal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Bolt Types
    GM2175888Courtesy of GENERAL MOTORS CORP.
  1. Remove the converter housing bolts (94). Use the J 41510:  T-50 plus bit for bolt (1) and DT-49037:  mortorq bit for bolt (2).
  2. Remove the converter housing (102).