Fastener Tightening Specifications
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Ref No.* | Quantity | Size | Specification | |
|---|---|---|---|---|---|
| Metric | English | ||||
| Auxiliary Fluid Cooler Bolts | - | - | - | 12 N.m | 106 lb in |
| Case Extension to Case Assembly | 16 | 6 | M10x1.5x40 | 55 N.m | 41 lb ft |
| Control Solenoid Valve Assembly and Control Valve Lower Body Assembly to Control Valve Upper Body Assembly | 310 | 6 | M5x0.8x55 | 8 N.m | 71 lb in |
| Control Solenoid Valve Assembly and Control Valve Lower Body Assembly to Control Valve Upper Body Assembly | 309 | 10 | M5x0.8x45 | 8 N.m | 71 lb in |
| Control Solenoid Valve Heat Sink to Valve Body | 312 | 2 | M5x0.8x53 | 8 N.m | 71 lb in |
| Control Valve Upper Body Assembly to Control Valve Lower Body Assembly | 301 | 12 | M5x0.8x36 | 8 N.m | 71 lb in |
| Control (with Body and Valve) Valve Assembly to Case Assembly | 22 | 6 | M5x0.8x73 | 8 N.m | 71 lb in |
| Floor Shift Control Indicator Screw | - | - | - | 2.5 N.m | 22 lb in |
| Floor Shift Control Lever Bolt | - | - | - | 9 N.m | 80 lb in |
| Floor Shift Control Lever Knob Screw | - | - | - | 6 N.m | 53 lb in |
| Fluid Filler Tube Nut | - | - | - | 18 N.m | 13 lb ft |
| Fluid Pan Assembly to Case Assembly | 30 | 18 | M6x1.0x20 | 9 N.m | 80 lb in |
| Fluid Pump Cover Assembly to Torque Converter Housing | 231 | 13 | M6 1.0x40 | 11 N.m | 97 lb in |
| Fuel Pipe Bracket Screw | - | - | - | 9 N.m | 80 lb in |
| Heat Shield to Transmission Bolts | - | - | - | 17 N.m | 13 lb ft |
| Input and Output Speed Sensor Assembly to Control Valve Upper Body Assembly | 302 | 2 | M6x1.0x20 | 12 N.m | 106 lb in |
| Line Pressure Test Hole Plug to Torque Converter Housing | 202 | 1 | 1/8-27 NPTF | 11 N.m | 97 lb in |
| Manual Shaft Detent Assembly to Valve Body | 23 | 1 | M6x1.0x14.5 | 12 N.m | 106 lb in |
| Range Selector Lever to Transmission | - | - | - | 25 N.m | 18 lb ft |
| Range Selector Lever Cable Bracket Bolts | - | - | - | 22 N.m | 16 lb ft |
| Torque Converter Cover Bolts | - | - | - | 12 N.m | 106 lb in |
| Torque Converter Housing Assembly to Case Assembly | 3 | 9 | M10x1.5x50 | 72 N.m | 53 lb ft |
| Torque Converter to Flex Plate Bolts | - | - | - | 65 N.m | 48 lb ft |
| Transmission to Engine Bolts | - | - | - | 50 N.m | 37 lb ft |
| Transmission Electrical Harness Retaining Screw | - | - | - | 9 N.m | 80 lb in |
| Transmission Fluid Cooler Pipe Bracket Bolt | - | - | - | 22 N.m | 16 lb ft |
| Transmission Mount to Crossmember Nuts | - | - | - | 50 N.m | 37 lb ft |
| Transmission Mount to Transmission Bolts | - | - | - | 50 N.m | 37 lb ft |
| *Reference number refers to the component callout number in Disassembled Views | |||||