Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fluid Pump Control Module

Courtesy of GENERAL MOTORS CORP.

Install the auxiliary fluid pump control module (2) to the engine control module bracket.
Install the auxiliary fluid pump control module electrical connector (1) to the auxiliary fuse block.

Fig 2: Identifying Auxiliary Fluid Pump Control Module Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the auxiliary fluid pump control module electrical connector (1) to the engine wiring harness electrical connector (2).

Fig 3: Identifying Auxiliary Fluid Pump Wire Harness & Retainers

Courtesy of GENERAL MOTORS CORP.

Connect the auxiliary fluid pump electrical wire harness connector (1) to the auxiliary fluid pump control module connector (2).