MP3023 LD ATC (with either 27T and 32T input shaft splines)

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The rear output shaft seal (20) is smaller than the MP 3024 ATC. The inner lip diameter measures 46.1 mm (1.815 in).
The rear output shaft bushing (19) is smaller than the MP 3024 ATC. The inner diameter measures 48 mm (1.890 in).
The rear case half (15) has smaller bores than the MP 3024 ATC in order to accommodate the smaller rear output shaft seal and the rear output shaft bushing.
There is an additional external wire harness bracket for the 32T application.