Transfer Case Rear Case Half Removal

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transfer Case Rear Half, Bracket, Bolts & Two/Four Wheel Drive Actuator Seal

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Transfer Case Bolts (Qty: 17)
2	Transfer Case Bracket
3	Transfer Case Rear Case Half CAUTION: Refer to Machined Surface Damage Caution . Tip: Use opposing pry bars at casting bosses to spread case. Use snap ring pliers to release the transfer case rear output shaft outer retaining ring from the transfer case rear output shaft rear bearing assembly.
4	Transfer Case Two/Four Wheel Drive Actuator Seal