Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fuel Level Sensor Wiring Pigtail

Courtesy of GENERAL MOTORS CORP.

Remove the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement .
Disconnect the fuel level sensor wiring pigtail electrical connector (1) from the module cover.

Fig 2: Identifying Fuel Level Sensor Connectors & Clips

Courtesy of GENERAL MOTORS CORP.

Remove the fuel level sensor wiring pigtail from under the module clip (1).
Gently push in the fuel level sensor retainers (2), disengaging them from the module reservoir.

Fig 3: Identifying Fuel Level Sensor

Courtesy of GENERAL MOTORS CORP.

Slide the fuel level sensor up, in order to remove the sensor from the module slot.