Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Power Steering Pump Drive Shaft Seal

Courtesy of GENERAL MOTORS CORP.

Lubricate the new power steering pump shaft seal with power steering fluid.
Use a deep 1 inch tall socket in order to install the new power steering pump shaft seal.
Install the power steering pump. Refer to Power Steering Pump Replacement (4.8L, 5.3L, 6.0L, and 6.2L) , Power Steering Pump Replacement (6.6L) or Power Steering Pump Replacement (4.3L) .