Test Description
WARNING: This page is about a different car, the 2003 GMC Savana and 2003 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
The numbers below refer to the step numbers in the diagnostic procedures.
- 2
Listen for a click when the valve operates. Verify that both the ON and OFF states are commanded. Repeat the commands as necessary. - 5
This step verifies that the control module is providing ground to the EVAP vent solenoid. - 6
This step tests if the EVAP vent solenoid control circuit is grounded.