LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1329 (Hybrid Engine Electrical System (Hp2)) >> Repair Instructions >> Generator Control Module Ground Strap Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Drive Motor Generator Control Module Ground Strap & Bolt
    GM1968778Courtesy of GENERAL MOTORS CORP.
  1. Position the ground strap (2) to the drive motor generator control module.
  2. CAUTION: Refer to Fastener Caution .
  3. Install the ground strap bolt (1) and tighten to 9 N.m (80 lb in).
  4. Install the air cleaner assembly. Refer to Upper Intake Manifold Cover Replacement .