LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1329 (Hybrid Engine Electrical System (Hp2)) >> Repair Instructions >> Battery Tray Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Refer to Battery Disconnect Warning .
    Fig 1: View Of Battery Tray Components
    GM1968744Courtesy of GENERAL MOTORS CORP.
  1. Remove the battery. Refer to Battery Replacement .
  2. Reposition the positive and negative battery cables out of the way.
  3. Remove the battery tray to battery tray reinforcement bolts (1).
  4. Remove the battery tray to battery tray support bolts (2).
  5. Remove the battery tray to auxiliary bussed electrical center (BEC) bolt (4).
  6. Remove the battery tray (3).
scientia non olet · About LEMON Manuals