LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1329 (Hybrid Engine Electrical System (Hp2)) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Tray Components
    GM1968744Courtesy of GENERAL MOTORS CORP.
  1. Install the battery tray (3) into the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the battery tray to battery tray reinforcement bolts (1) and tighten to 9 N.m (80 lb in).
  3. Install the battery tray support bolts (2) and tighten to 9 N.m (80 lb in).
  4. Install the battery tray to auxiliary BEC bolt (4) and tighten to 9 N.m (80 lb in).
  5. Install the positive and negative battery cables.
  6. Install the battery. Refer to Battery Replacement .
scientia non olet · About LEMON Manuals