LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1329 (Hybrid Engine Electrical System (Hp2)) >> Repair Instructions >> Battery Negative Cable Disconnection and Connection >> Connect Procedure

Connect Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Clean any existing corrosion from the battery terminal and the battery cable.
    Fig 1: Locating Battery Components
    GM1968005Courtesy of GENERAL MOTORS CORP.
  1. Install the negative battery cable (6) to the battery.
  2. Rotate the lever lock (4) clockwise until an audible click is heard in order to connect the negative battery cable to the battery.
  3. Position the negative battery cable insulating cover (5) over the negative terminal.
scientia non olet · About LEMON Manuals