LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1329 (Hybrid Engine Electrical System (Hp2)) >> Diagnostic Information and Procedures >> DTC C0900 or C12E2 >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Battery Voltage Signal - EBCM

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition ON, engine OFF.
Parameter Normal Value:  12.6 Volts
B+ 0.0 Volts* 0.0 Volts* 12.6 Volts
*The scan tool will not communicate with the EBCM if there is 0 Volts on the circuit.