LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1329 (Hybrid Engine Electrical System (Hp2)) >> Diagnostic Information and Procedures >> DTC C0899 or C12E1 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engine running, accessories OFF, measure and record the battery voltage at the 12 V battery terminals. The voltage should be between 12.6-15.0 V.
  2. Observe the scan tool EBCM Battery Voltage Signal parameter. The reading should be between 12.6-15.0 Volts.