LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1326 (Antilock Brake System - Hybrid (Hp2)) >> Diagnostic Information and Procedures >> DTC C0880, C12E5, or C120F >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The EBCM detects the voltage on the 5 volt reference circuit to the brake master cylinder piston position sensor, steering angle sensor and brake master cylinder piston position sensor is less than 4.8 volts or greater than 5.2 volts.