LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1318 (Wiring Systems And Power Management - Service, Troubleshooting & Diagnosis) >> Splicing Copper Wire Using Splice Sleeves >> Special Tools

Special Tools

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

J-38125  Terminal Repair Kit

NOTE: Use only DuraSeal splice sleeves. Other splice sleeves may not protect the splice from moisture or provide a good electrical connection.

Use DuraSeal splice sleeves to form a one-to-one splice on all types of insulation except tefzel and coaxial. Use DuraSeal splice sleeves where there are special requirements such as moisture sealing. Follow the instructions below in order to splice copper wire using DuraSeal splice sleeves.

Splice Sleeve Color Crimp Tool Nest Color Wire Gage mm2 / (AWG)
Salmon (Yellow-Pink)
12089189
Red (1) 0.035-0.8/(18-20)
Blue
12089190
Blue (2) 1-2/(14-16)
Yellow
12089191
Yellow (3) 3-5/(10-12)
Green
88988379
Red (1) 0.22-0.35/(22-26)