Torque Converter Installation and Holding Fixture Removal

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transmission Case Assembly & Torque Converter Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Procedure
Preliminary Procedure: Rotate the transmission so that the fluid pan assembly is down.
1	Transmission Case Assembly Special Tools DT 47605: Holding Fixture Adapter DT 47605 Holding Fixture. See Special Tools . J 3289-20: Holding Fixture Base Assembly J 8763-B: Holding Fixture For equivalent regional tools, refer to Special Tools .
2	Torque Converter Assembly

Callout

Procedure

Preliminary Procedure:
Rotate the transmission so that the fluid pan assembly is down.

Transmission Case Assembly

Special Tools

DT 47605: Holding Fixture Adapter
DT 47605 Holding Fixture. See Special Tools .
J 3289-20: Holding Fixture Base Assembly
J 8763-B: Holding Fixture

For equivalent regional tools, refer to Special Tools .

Torque Converter Assembly