LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1309 (Engine Controls And Fuel - 4.3L - Introduction (2 Of 2)) >> Repair Instructions >> Evaporative Emission Line Replacement - Engine >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of EVAP Canister Purge Solenoid Valve Tube Quick Connect Fitting
    GM1876612Courtesy of GENERAL MOTORS CORP.
  1. Remove the caps from the EVAP canister purge solenoid valve and the chassis EVAP pipe.
  2. Position the EVAP canister purge solenoid valve tube.
  3. Connect the EVAP canister purge solenoid valve tube quick connect fitting (1) to the EVAP canister purge solenoid valve. Refer to Plastic Collar Quick Connect Fitting Service .
    4. Fig 2: View Of Fuel Feed Pipe
    GM1876017Courtesy of GENERAL MOTORS CORP.
  4. Connect the EVAP canister purge solenoid valve tube quick connect fitting (2) to the chassis EVAP line. Refer to Plastic Collar Quick Connect Fitting Service .
scientia non olet · About LEMON Manuals