Installation Procedure
WARNING: This page is about a different car, the 2009 GMC Sierra and 2009 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air cleaner outlet resonator to the MAF/IAT sensor and throttle body.
- Tighten the air cleaner outlet resonator clamp (2) at the throttle body.
Tighten: Tighten the clamp to 4 N.m (35 lb in).
- Tighten the air cleaner outlet resonator clamp (1) at the MAF/IAT sensor.
Tighten: Tighten the clamp to 4 N.m (35 lb in).
- Connect the PCV hose (1) to the air cleaner outlet resonator.
CAUTION:
Refer to Fastener Caution
.