LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1307 (Wiring Systems And Power Management - Introduction) >> Schematic and Routing Diagrams >> Vehicle Zoning Strategy

Vehicle Zoning Strategy

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

All grounds, in-line connectors, pass-through grommets, and splices have identifying numbers that corresponds to where they are located in the vehicle. The following table explains the numbering system.

Fig 1: Identifying Truck Zoning Locations
GM160995Courtesy of GENERAL MOTORS CORP.
Callout Numbers Zone Description
100-199 Engine compartment (All forward of the dash panel)
001-099 are additional for the engine compartment (Only to be used if all 100-199 items are used)
200-299 Within the instrument panel area
300-399 Passenger compartment/truck bed (From instrument panel to the rear wheelhouse)
400-499 Truck bed (From the instrument panel to the rear wheelhouse)
500-599 Within the left front door
600-699 Within the right front door
700-799 Within the left rear door
800-899 Within the right rear door
900-999 Within the endgate door