Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Fuel Filter Hoses & Clamps

Courtesy of GENERAL MOTORS CORP.

Install the fuel hose (4) to the fuel injection fuel feed manifold and injection pump.
Position the fuel hose clamp (3) at the fuel injection pump.

Fig 2: View Of Fuel Hose Clamps

Courtesy of GENERAL MOTORS CORP.

Position the fuel hose clamp (2) at the fuel injection fuel feed manifold.
Install the intake manifold tube. Refer to Intake Manifold Tube Replacement .
Install the water outlet. Refer to Water Outlet Tube Replacement (LU3) or Water Outlet Tube Replacement (LMM) .
Prime the fuel system. Refer to Fuel System Priming .
Start the engine. If the engine stalls, repeat the above step.
Once the engine starts, inspect for fuel leaks.