Exhaust Gas Recirculation Valve Temperature Sensor Replacement - Position 1

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Exhaust Gas Recirculation Valve Temperature Sensor -- Position 1

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
1	EGR Temperature Sensor Assembly CAUTION: Refer to Fastener Caution . Procedure Disconnect the harness connector. Detach the EGR temperature sensor assembly harness connector from the bracket. Tighten: 44 N.m (32 lb ft)

Callout

Component Name

Preliminary Procedure:
Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .

EGR Temperature Sensor Assembly

CAUTION: Refer to Fastener Caution .

Procedure

Disconnect the harness connector.
Detach the EGR temperature sensor assembly harness connector from the bracket.

Tighten: 44 N.m (32 lb ft)