LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1305 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front Door Opening Weatherstrip Replacement (Extended Cab) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open both doors.
  2. Remove the front and rear door sill plate. Refer to Front Side Door Sill Trim Plate Replacement (Extended Cab) , Front Side Door Sill Trim Plate Replacement (Regular Cab/Crew Cab) , Rear Side Door Sill Trim Plate Replacement (Crew Cab) or Rear Side Door Sill Trim Plate Replacement (Extended Cab) .
  3. Remove the hinge pillar trim. Refer to Body Hinge Pillar Trim Panel Replacement
  4. Remove the body lock pillar trim. Refer to Body Lock Pillar Trim Replacement (Crew Cab) , Body Lock Pillar Trim Replacement (Extended Cab) or Body Lock Pillar Trim Replacement (Regular Cab)
  5. Remove the windshield pillar molding. Refer to Windshield Pillar Garnish Molding Replacement .
    6. Fig 1: View Of Weatherstrip & Pinch-Weld Flange
    GM1673255Courtesy of GENERAL MOTORS CORP.
  6. Remove the weatherstrip (1) from the pinch-weld flange (2).
scientia non olet · About LEMON Manuals