Installation Procedure
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the ground strap to the stud.
- Install the ground strap nut to the stud at the front of dash and tighten to 9 N.m (80 lb in).
- Position the ground strap and engine wiring harness ground.
- Install the engine wiring harness ground bolt tighten to 16 N.m (12 lb ft).
CAUTION:
Refer to Fastener Caution
.