Removal Procedure
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the engine ground strap bolt (2) from the rear of the cylinder head.
- Reposition the engine ground strap (1) from the cylinder head.
- Remove the ground strap nut (1) from the stud on the plenum front panel.
- Remove the ground strap (2) from the stud and the vehicle.