Installation Procedure
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the ground strap (2) to the vehicle and the stud on the plenum front panel.
- Install the ground strap nut (1) to the stud on the plenum front pane and tighten to 9 N.m (80 lb in).
- Position the ground strap (1) to the cylinder head.
- Install the ground strap bolt (2) to the cylinder head and tighten to 16 N.m (12 lb ft).
CAUTION:
Refer to Fastener Caution
.