LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1301 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Disconnection and Connection (With Single Battery) >> Connect Procedure

Connect Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Refer to Battery Disconnect Warning .
NOTE: Clean any existing corrosion from the battery terminal and the battery cable end.
    Fig 1: View Of Battery Cable Components
    GM1702504Courtesy of GENERAL MOTORS CORP.
  1. Position the negative battery cable to the battery.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the negative battery cable onto the battery terminal.
  3. Tighten the negative cable nut (6) to 5 N.m (44 lb in).
  4. Close the hood.
scientia non olet · About LEMON Manuals