Duct Air Temperature Sensor Replacement - Lower Right Side

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Air Temperature Sensor - RH

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front floor console (if equipped). Refer to Front Floor Console Replacement (with RPO SLT) or Front Floor Console Replacement (without RPO SLT) . Remove the radio front floor console speaker (if equipped). Refer to Radio Front Floor Console Speaker Replacement . Remove the instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Replacement (With RPO SLT) or Instrument Panel Insulator Replacement (Without RPO SLT) . Remove the right side air distribution duct.
1	Air Temperature Sensor - RH Procedure Using long straight needle nose pliers, grasp the sensor in a parallel direction and rotate sensor 1/4 turn counter clock wise to remove. Disconnect the electrical connector.

Callout

Component Name

Preliminary Procedures

Remove the front floor console (if equipped). Refer to Front Floor Console Replacement (with RPO SLT) or Front Floor Console Replacement (without RPO SLT) .
Remove the radio front floor console speaker (if equipped). Refer to Radio Front Floor Console Speaker Replacement .
Remove the instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Replacement (With RPO SLT) or Instrument Panel Insulator Replacement (Without RPO SLT) .
Remove the right side air distribution duct.

Air Temperature Sensor - RH

Procedure

Using long straight needle nose pliers, grasp the sensor in a parallel direction and rotate sensor 1/4 turn counter clock wise to remove.
Disconnect the electrical connector.