Steering Column Shroud Replacement

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Upper & Lower Steering Column Shrouds & Tilt Lever

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Tilt Lever Procedure: Remove by pulling straight outwards.
2	Upper Steering Column Shroud
3	Lower Steering Column Shroud CAUTION: Refer to Fastener Caution . Procedure If equipped, remove the 2 lower steering column shroud bolts. Install 2 lower steering column shroud bolts if damage exists to the steering column shroud locking features. Tighten: 3 N.m (27 lb in)

Callout

Component Name

Tilt Lever
Procedure:
Remove by pulling straight outwards.

Upper Steering Column Shroud

Lower Steering Column Shroud

CAUTION: Refer to Fastener Caution .

Procedure

If equipped, remove the 2 lower steering column shroud bolts.
Install 2 lower steering column shroud bolts if damage exists to the steering column shroud locking features.

Tighten: 3 N.m (27 lb in)