LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1296 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning Compressor Bracket Replacement (Non-HP2) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying A/C Compressor Bracket Mounting Bolts
    GM363185Courtesy of GENERAL MOTORS CORP.
  1. Install the A/C compressor bracket.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the A/C compressor bracket mounting bolts and tighten to 50 N.m (37 lb ft).
  3. Install the A/C belt tensioner.
  4. Install the A/C belt tensioner bolts and tighten to 50 N.m (37 lb ft).
  5. Install the A/C compressor. Refer to Air Conditioning Compressor Replacement (LLY/LMM) , Air Conditioning Compressor Replacement (LU3) , Air Conditioning Compressor Replacement (LY2, LY5, LH6, L76, L92 and LMG)  or Air Conditioning Compressor Replacement (HP2) .
scientia non olet · About LEMON Manuals