Rear License Plate Lamp Bulb Replacement

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of License Lamp Bulb

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Procedure Reach under the rear bumper for the bulb socket. Turn the bulb socket counter-clockwise and pull the bulb socket out of the connector. Pull the old bulb from the socket, keeping the bulb straight as you pull it out. Install the new bulb.
1	Bulb Socket
2	Rear License Plate Lamp Bulb

Callout

Component Name

Procedure

Reach under the rear bumper for the bulb socket.
Turn the bulb socket counter-clockwise and pull the bulb socket out of the connector.
Pull the old bulb from the socket, keeping the bulb straight as you pull it out.
Install the new bulb.

Bulb Socket

Rear License Plate Lamp Bulb