LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1292 (Sunroof System) >> Repair Instructions >> Sunroof Window Replacement (Extended Cab) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Sunroof Window Panel Screws
    GM294278Courtesy of GENERAL MOTORS CORP.
  1. Position the sunroof window panel to the sunroof module.

    Ensure that the information logo stencil is towards the rear of the sunroof opening.

    2. CAUTION: Refer to Fastener Caution .
  2. Install the sunroof window panel screws to the sunroof window panel.

    Tighten:  Tighten the sunroof window panel screws to 4 N.m (35 lb in).

  3. Adjust the sunroof window panel as necessary. Refer to Sunroof Window Height and Opening Fit Adjustment (Extended Cab)  or Sunroof Window Height and Opening Fit Adjustment (Crew Cab) .
  4. Inspect the sunroof window panel for proper operation.
scientia non olet · About LEMON Manuals