Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the sunshade to the vehicle from the passengers side.

Fig 1: View Of Sunshade End & Bracket Notch

Courtesy of GENERAL MOTORS CORP.

Insert the end of the sunshade (1) to the driver side bracket (2) notch.

Fig 2: Removing/Installing Sunshade From Bracket Notch

Courtesy of GENERAL MOTORS CORP.

Insert the sunshade (1) to the passengers side bracket (2) notch.

Fig 3: View Of Turning Sunshade Cam Counterclockwise

Courtesy of GENERAL MOTORS CORP.

Turn the sunshade cam (2) until it is aligned with the bracket (3) notch.
Install the sunshade.

Fig 4: Identifying Sunshade Cam Locking Hole

Courtesy of GENERAL MOTORS CORP.

Remove the suitable tool (1) from the sunshade cam locking hole (2).
Ensure that the sunshade cam (2) is fully seated in the bracket (3) and the sunshade slides smoothly.
Install the sunroof window. Refer to Sunroof Window Replacement (Extended Cab) or Sunroof Window Replacement (Crew Cab) .
Verify the operation of the sunshade.