LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1292 (Sunroof System) >> Repair Instructions >> Sunroof Opening Trim Finish Lace Replacement (Extended Cab) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Sunroof Finishing Lace
    GM1564257Courtesy of GENERAL MOTORS CORP.
  1. Position the end of the sunroof finishing lace at the center rear of the sunroof opening.
  2. Fig 2: Identifying Finishing Lace In Track Assembly Flange
    GM1222470Courtesy of GENERAL MOTORS CORP.
  3. Push the finishing lace (2) onto the track assembly flange (1) until fully seated around the sunroof opening.
  4. Pull the finishing lace draw cord toward the sunroof opening. Remove the cord from the periphery of the opening.
  5. Ensure that the finishing lace (2) is properly seated over the outer surface of the headliner (3).