Fastener Tightening Specifications
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Belt Assembly Anchor Bolt | 70 N.m | 52 lb ft |
| Body Lock Pillar Garnish Molding Screws | 2 N.m | 18 lb in |
| Body Rear Corner Upper Garnish Molding Screws | 2 N.m | 18 lb in |
| Center Pillar Upper Assist Handle Screws | 1.2 N.m | 10 lb in |
| Center Pillar Upper Garnish Molding Screws | 2 N.m | 18 lb in |
| Coat Hook Screws | 9 N.m | 80 lb in |
| Floor Console Bolts | 6 N.m | 53 lb in |
| Front Floor Console Rear Cupholder Screw | 2 N.m | 18 lb in |
| Jack and Tool Stowage Container Retaining Nut | 5 N.m | 44 lb in |
| Liftgate Trim Finish Panel Screw | 2 N.m | 18 lb in |
| Overhead Console Screws | 2 N.m | 18 lb in |
| Quarter Panel Trim Armrest Screws | 2 N.m | 18 lb in |
| Quarter Panel Trim Screws | 2 N.m | 18 lb in |
| Rear Assist Handle Screws | 6 N.m | 53 lb in |
| Side Door Armrest Bolt | 2 N.m | 18 lb in |
| Side Door Trim Panel Bolt | 2 N.m | 18 lb in |
| Sunshade Screws | 6 N.m | 53 lb in |
| Tool Storage Compartment Bracket Nuts | 50 N.m | 36 lb ft |
| Tool Storage Compartment Nuts | 10 N.m | 88 lb in |
| Windshield Side Garnish Molding Screws | 2 N.m | 18 lb in |
| Windshield Side Pillar Assist Handle Screws | 6 N.m | 53 lb in |