Headlamp Switch Bezel Replacement (with RPO SLT)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Headlamp Switch Trim Plate Assembly & Retainers

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Headlamp Switch Trim Plate Assembly Procedure Disconnect the electrical connectors. If replacing the trim plate, transfer the switches as needed.
2	Headlamp Switch Plate Retainer (Qty: 4)

Callout

Component Name

Preliminary Procedure:
Remove the knee bolster. Refer to Knee Bolster Replacement (With RPO SLT) or Knee Bolster Replacement (Without RPO SLT) .

Headlamp Switch Trim Plate Assembly

Procedure

Disconnect the electrical connectors.
If replacing the trim plate, transfer the switches as needed.

Headlamp Switch Plate Retainer (Qty: 4)