Rear Seat Recliner Replacement (Extended Cab with A68)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Back Recliner & Frame Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the rear seat. Refer to Rear Seat Replacement (Crew Cab with A68) , Rear Seat Replacement (Extended Cab with AM7) or Rear Seat Replacement (Extended Cab with A68) . Separate the rear split bench seat. Refer to Rear Seat Separation (Extended Cab With A68) . Remove the rear seat back recliner cover. Refer to Rear Seat Back Recliner Cover Replacement (Crew Cab with A68) or Rear Seat Back Recliner Cover Replacement (Extended Cab with A68) . Remove the rear seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement (Extended Cab with A68) , Rear Seat Back Cushion Cover and Pad Replacement (Extended Cab with AM7) or Rear Seat Back Cushion Cover and Pad Replacement (Crew Cab with A68) . Remove the rear seat cushion cover and pad. Refer to Rear Seat Cushion Cover and Pad Replacement (Extended Cab with A68) , Rear Seat Cushion Cover and Pad Replacement (Extended Cab with AM7) or Rear Seat Cushion Cover and Pad Replacement (Crew Cab with A68) .
1	Rear Seat Back Cushion Frame Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 30 N.m (22 lb ft)
2	Rear Seat Cushion Frame Bolt (Qty: 2) Tighten: 30 N.m (22 lb ft)
3	Rear Seat Back Recliner (Qty: 2)