Front Seat Armrest Lid Replacement

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Seat Armrest Lid

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front seat armrest. Refer to Front Seat Armrest Replacement (AE7) or Front Seat Armrest Replacement (AZ3)
1	Front Seat Armrest Inner Lid Fasteners (Qty: 4) Procedure: Open the armrest lid and remove fasteners.
2	Front Seat Armrest Inner Lid Procedure: Pull upward to disengage the inner lid retaining tabs from the armrest lid.
3	Front Seat Armrest Lid Hinge Fasteners (Qty: 4) Procedure: The lid hinge fasteners are concealed between hinge and inner lid/bin.
4	Front Seat Armrest Lid Procedure The Inner lid and lid hinge are not serviceable components. When replacing the armrest lid with a new unit, transfer components as necessary.