LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1284 (Engine Cooling System) >> Repair Instructions >> Radiator Outlet Hose Replacement (Diesel) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Radiator Outlet Hose (Diesel)
    GM2042825Courtesy of GENERAL MOTORS CORP.
  1. Drain the engine coolant. Refer to Cooling System Draining and Filling (Vac-N-Fill)  or Cooling System Draining and Filling (Static Fill) .
  2. Remove the upper and lower fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement (LMM Diesel)  or Engine Coolant Fan Upper Shroud Replacement (Mechanical)  and Engine Coolant Fan Lower Shroud Replacement (Mechanical) .
  3. Remove the surge tank outlet hose (1) from the surge tank.
  4. Fig 2: View Of Radiator Outlet Hose At Engine
    GM674559Courtesy of GENERAL MOTORS CORP.
  5. Remove the radiator outlet hose from the water pump.
  6. Fig 3: View Of Outlet Heater Hose & Outlet Radiator Hose
    GM674543Courtesy of GENERAL MOTORS CORP.
  7. Remove the heater outlet hose from the radiator outlet hose.
  8. Remove the radiator outlet hose from the radiator.
  9. Remove the radiator outlet hose clip retainers from the brackets.
  10. Remove the radiator outlet hose from the vehicle.