Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Generator Cooling Inlet Pipe & Generator Cooling Inlet Pipe Fitting

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Discard the EOC retaining clip and install a new retaining clip.

Install the EOC pipe into the EOC pipe fitting.
A distinct snap should be heard or felt when assembling the EOC pipe to the fitting.
To ensure the cooler line is properly installed, give the cooler pipe a gentle pull.