Engine Coolant Fan Resistor Replacement (Right HP2)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Coolant Fan Resistor (Right-HP2)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove air cleaner. Refer to Air Cleaner Assembly Replacement Disconnect the electrical connector from the resistor.
1	Engine Coolant Fan Resistor Bolt CAUTION: Refer to Fastener Caution . Tighten: 10 N.m (89 lb in)
2	Engine Coolant Fan Resistor

Callout

Component Name

Preliminary Procedures

Remove air cleaner. Refer to Air Cleaner Assembly Replacement
Disconnect the electrical connector from the resistor.

Engine Coolant Fan Resistor Bolt

CAUTION: Refer to Fastener Caution .

Tighten: 10 N.m (89 lb in)

Engine Coolant Fan Resistor