Engine Coolant Fan Motor Replacement (HP2)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Engine Coolant Fan Motors (HP2)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the cooling blade(s). Refer to Engine Coolant Fan Replacement (Non-HP2) or Engine Coolant Fan Replacement (HP2) Disconnect the electrical connectors from the cooling fans.
1	Cooling Fan Motor Bolts (Qty: 6) CAUTION: Refer to Fastener Caution . Tighten: 10 N.m (89 lb in)
2	Cooling Fan Motor(s).

Callout

Component Name

Preliminary Procedures

Remove the cooling blade(s). Refer to Engine Coolant Fan Replacement (Non-HP2) or Engine Coolant Fan Replacement (HP2)
Disconnect the electrical connectors from the cooling fans.

Cooling Fan Motor Bolts (Qty: 6)

CAUTION: Refer to Fastener Caution .

Tighten: 10 N.m (89 lb in)

Cooling Fan Motor(s).