LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1284 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Lower Shroud Replacement (Mechanical) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Cooler Hose Clip At Lower Fan Shroud
    GM367017Courtesy of GENERAL MOTORS CORP.
  1. Install the lower fan shroud and ensure it is centered over lower radiator support.
  2. Engage the two clips from the radiator.
  3. If equipped with the engine oil cooler, Install the oil cooler hose clip to the lower fan shroud.
  4. Install the radiator. Refer to Radiator Replacement (4.3L, 4.8L, 5.3L, and 6.0L)  or Radiator Replacement (HP2)  or Radiator Replacement (LMM) .