Radiator Grille Replacement (Chevrolet)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Radiator Grille (Chevrolet)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the radiator air upper baffle/deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement .
1	Radiator Grille Bolts (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 7 N.m (62 lb in)
2	Radiator Grille Procedure Disengage the six clips by using a pair of flat-bladed pliers pinching the retainer tabs securing the grille to the hood stop and hood bumper brackets. Separate the radiator grille from the hood stop and hood bumper brackets by pushing the radiator grille outward away from the vehicle.

Callout

Component Name

Preliminary Procedure:
Remove the radiator air upper baffle/deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement .

Radiator Grille Bolts (Qty: 4)

CAUTION: Refer to Fastener Caution .

Tighten: 7 N.m (62 lb in)

Radiator Grille

Procedure

Disengage the six clips by using a pair of flat-bladed pliers pinching the retainer tabs securing the grille to the hood stop and hood bumper brackets.
Separate the radiator grille from the hood stop and hood bumper brackets by pushing the radiator grille outward away from the vehicle.