Timing Chain & Sprocket Removal: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
- J 8433 Two Jaw Puller. See Special Tools .
- J 41558 Crankshaft Sprocket Remover. See Special Tools .
- J 41816-2 Crankshaft End Protector. See Special Tools .
- J 42386-A Flywheel Holding Tool. See Special Tools .