LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1268 (Engine Mechanical - 4.8L, 5.3L, 6.0L Or 6.2L (3 Of 5)) >> Off-Vehicle Repair Instructions (1 Of 3) >> Engine Coolant Air Bleed Pipe & Hole Cover Removal (RPO LY2/LY6/L92)

Engine Coolant Air Bleed Pipe & Hole Cover Removal (RPO LY2/LY6/L92)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Coolant Air Bleed Pipe Components
    GM1403313Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine coolant air bleed pipe bolts (309).
  2. Remove the pipe (307) with seals (308).
    3. Fig 2: Identifying Coolant Air Bleed Cover Bolts
    GM1403314Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine coolant air bleed cover bolts (312).
  4. Remove the covers (313) with seals (308).
    5. Fig 3: View Of Coolant Air Bleed Pipe Seal
    GM1552485Courtesy of GENERAL MOTORS CORP.
  5. Remove the seals (308) from the pipe and covers.
  6. Discard the seals.
scientia non olet · About LEMON Manuals