LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1268 (Engine Mechanical - 4.8L, 5.3L, 6.0L Or 6.2L (3 Of 5)) >> Off-Vehicle Repair Instructions (1 Of 3) >> Engine Coolant Air Bleed Pipe & Hole Cover Removal (RPO LC9/LY5/LMG/L76)

Engine Coolant Air Bleed Pipe & Hole Cover Removal (RPO LC9/LY5/LMG/L76)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Coolant Air Bleed Pipe
    GM1401993Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine coolant air bleed pipe bolts (309).
  2. Remove the pipe (307) with seals (308).
    3. Fig 2: View Of Air Bleed Pipe Bolts & Seals
    GM1402001Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine coolant air bleed cover bolts (312).
  4. Remove the covers (313) with seals (308).
    5. Fig 3: View Of Coolant Air Bleed Pipe Seal
    GM1552485Courtesy of GENERAL MOTORS CORP.
  5. Remove the seals (308) from the pipe and covers.
  6. Discard the seals.
scientia non olet · About LEMON Manuals