LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1268 (Engine Mechanical - 4.8L, 5.3L, 6.0L Or 6.2L (3 Of 5)) >> Off-Vehicle Repair Instructions (1 Of 3) >> Engine Block Valley Cover Removal

Engine Block Valley Cover Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Valley Cover Components
    GM1403316Courtesy of GENERAL MOTORS CORP.
  1. Remove the valley cover bolts (506).
  2. Remove the valley cover (555) and gasket (556).
  3. Remove the O-ring seals (537) from the cover.
    4. Fig 2: Identifying Oil Pressure Sensor & Washer
    GM1403317Courtesy of GENERAL MOTORS CORP.
  4. Remove the oil pressure sensor (706) and washer (707), as required.
scientia non olet · About LEMON Manuals