Rear Case Installation
WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | A/Trans Rear Case Gasket |
| 2 | A/Trans Rear Case Assembly Tip: Be cautious of the park pawl rod, making sure it is lined up accurately thru the rear case assembly. |
| 3 | A/Trans Rear Case Bolt M8 x 1.25 x 30 (Qty: 12)
NOTE:
Refer to Fastener Notice
.
Tighten: Tighten bolt to 24-29 N.m (18-21 lb ft). |